Logo print

title

Trip-free switch DMX3-I 1600 4 poles, draw-out version and with rated current of 1600A and electronic protection unit.

DMX³ -I 1600 LEGRAND

Trip-free switch DMX3-I 1600 4 poles, draw-out version and with rated current of 1600A and electronic protection unit.

REF. 028499 EAN. 3414972282376
Download product sheet
You can only compare 4 products, you must remove 1 to add this one
Product charateristics
  • Breaking capacity of 42kA, according to EN/IEC standard 60947 - 2, suitable for protection of high power industrialinstallations. Rated insulation voltage of 1000VRated impulse withstand voltage of 12kV
  • Climatic condition according to IEC/EN 60947 - 1 Annex Q, Cat. F subject to temperature,humidity, vibration, shock and salt mist.
  • Can be equipped with releases (undervoltage and shunt releases) and auxiliary contacts. Can used with rotary handles or motor operator. Locking Accessories are available.
  • Has diffent type of possible connection accessories: cage terminals, spreader and rear terminals.Is available also in a plug-in version (circuit breaker fitted with special terminals and mountedon a plug-in base) or in a draw-out version (a plug-in version fitted with a"Debro-lift" mechanism which can be used to withdraw the breaker whilekeeping it on its base)

The + product

Installation
  • Electric and mechanical robustness, in addiction to breaking capacity and chances of accessorizing, are perfectly suited for increase continuity service looking at the plant energy efficiency and in respect of “green aspects”
Usage
  • DMX3 -I platform provide a complete "project" approach in premium market segment, offering a range completely suitable for high power application
Advantages
  • Rear terminals not mounted by default on the device to avoid to buy and to throw away them, in case of use of front terminals connection.Connection choice done by customer,according to specific exigences, so to optimize costs.

Technical characteristics

Rated permanent current Iu 1600 A
Rated voltage 0-690 V
Device construction Built-in device slide-in technique (withdrawable)
Integrated earth fault protection No
Type of electrical connection of main circuit Bolt connection
Suitable for DIN rail (top hat rail) mounting No
DIN rail (top hat rail) mounting optional No
Number of auxiliary contacts as change-over contact 1
With switched-off indicator Yes
With integrated under voltage release No
Number of poles 4
Position of connection for main current circuit Back side
Type of control element Push button
Complete device with protection unit No
Motor drive integrated No
Motor drive optional Yes
Degree of protection (IP) IP30
Width 309 mm
Height 310 mm
Depth 239 mm
Degree of impact strength (IK) Not applicable
Operating / setting temperature -25-70 °C
Storage temperature -25-70 °C
Voltage type AC
Frequency 50-60 Hz
Electric supplying direction By the top or bottom
Terminal marking indication No
Colour Grey
RAL-number 7035
Halogen free Yes
Terminals capacity 500-1000 mm²
Cable nature for connection Flexible or rigid
Label space/information surface No
Contains Batteries and/or Accumulator No

Documentation

4 documents
Instruction Use
LE13029AA.pdf pdf (23.31 Mo)
Workshop Book
EXB24001_FR.pdf pdf (99.37 Mo)
Technical Sheet
Workshop Book
EXB20020_EN.pdf pdf (87.5 Mo)
2 documents
Catalogue Technical Page
ex223001_0226-0227.pdf pdf (0.34 Mo)
Catalogue Commercial Page
ex223001_0213.pdf pdf (0.06 Mo)
SELECT AN ACTION