Name: Contactor CX³ without handle 2 pole - 16A - 250V~ - NC + NO contacts with 24V~ coil - 1 module
SKU: 412503

Contactor CX³ without handle 2 pole - 16A - 250V~ - NC + NO contacts with 24V~ coil - 1 module

CX³ LEGRAND

Contactor CX³ without handle 2 pole - 16A - 250V~ - NC + NO contacts with 24V~ coil - 1 module

REF. 412503 412503B EAN. 3245064125031

Compare You can only compare 4 products, you must remove 1 to add this one

This product should be installed in compliance with installation rules, preferably by a qualified electrician. Incorrect installation and/or incorrect use can lead to risk of electric shock or fire. Before carrying out the installation, read the instructions and take account of the product's specific mounting location. Do not open up, dismantle, alter or modify the device except where specifically required to do so by the instructions. All Legrand products must be opened and repaired exclusively by personnel trained and approved by Legrand. Any unauthorised opening or repair completely cancels all liabilities and the rights to replacement and guarantees. Use only Legrand brand accessories.

Easy integration: fitted with two DIN rail clamps, one top side and one bottom side to ease the clipping. Allows the insertion of prong busbar at the top side.

Fitted with a label holder allowing a clear, visible and convenient identification of the circuit.

Rated operating voltage	250-250 V
Rated operation current	16 A
Rated excitation voltage	20-26 V
Voltage type (operating voltage)	AC
Voltage type (excitation voltage)	AC
Number of contacts as normally open contact	1
Number of contacts as normally closed contact	1
Max. incandescent lamp load	2000 W
Max. load fluorescent lamp	1300 VA
Max. load fluorescent lamp (Duo circuit)	1400 VA

Max. load fluorescent lamp (parallel compensated)	600 VA
Slider for hand switch	Yes
Width in number of modular spacings	1
Built-in depth	44 mm
Additional equipment possible	Yes
Degree of protection (IP)	IP2X
Width	17.8 mm
Height	94.9 mm
Depth	67.3 mm

Contactor CX³ without handle 2 pole - 16A - 250V~ - NC + NO contacts with 24V~ coil - 1 module